How to Bleach Tie Dye T-Shirts and Screen Print with Vinyl

May 20, 2020 | Cricut Projects, Project Ideas, Screen Printing, Summer Fun, Vinyl Projects


This post may contain Amazon or other affiliate links. If you purchase something through the link, I may receive a small commission at no extra charge to you.


One of my favorite summer projects is tie dying t-shirts. It’s a great project to do with a group of kids.

Using bleach on a colored shirt is a different take on the traditional tie dye project.  You start with a colored t-shirt and use bleach to remove some of the color.

You can use rubber bands and create a more traditional tie dye look.  But, we decided to go for a more splattered effect. We concentrated the bleach around the middle of the shirt to leave room to add a DIY screen printed design.

diy shirt craft with kids bleach diy project usa

Supplies Needed for Bleach Tie Dye Shirts

diy shirt craft with kids bleach tie dye

How to Setup Your Shirts for Bleach Dying

This is definitely an outdoor project.  The bleach smell is pretty strong.

We spread out large pieces of cardboard on the driveway.  We also put a piece of cardboard inside the shirt to prevent the bleach from going through the back.

bleach tie dye shirt project

In a spray bottle, carefully pour your bleach.  I know some crafters like to dilute with water, but I did not.  The full strength worked really well.

Start spraying the bleach on your shirt.  We adjusted the spray bottle nozzle for different effects. The tighter the nozzle, the more of a wide spray effect.  The looser the nozzle, the more of a stream and you can get the larger splotches.

bleach shirt how to tutorial vinyl cricut

After spraying the front of the shirt, we flipped them over and sprayed a few spots the back.

It takes a few minutes for the bleach to really remove the color in the shirt.  It’s fun to watch as it changes colors.

After about 20-30 minutes in the sun, I washed the shirts on a regular cycle.

screen printing tie dye bleach

The clean shirts are ready to be screen printed.  We left a nice white area in the middle of the shirt to add our designs.

Supplies Needed for Screen Printing with Vinyl

SVG Files Used in this Tutorial

screen printing vinyl tutorial craft kids

Screen Printing with Cricut or Silhouette and Adhesive Vinyl

My absolute favorite way to personalize t-shirts is screen printing.  I use my Cricut to cut a design on adhesive vinyl.  If you are new to screen printing with your vinyl cutter, you can find all of the beginner tips for screen printing here.

I transfer the vinyl to my screen printing frame and squeegee ink over the design. For more step-by-step instructions on this screen printing process, check out my guide to screen printing with vinyl.

screen printing on bleach diy shirt personalization

Mixing Speedball Fabric Inks

I wanted the design color to match the color of my shirts as closely as possible.  One of the reasons I love screen printing, is I can create custom colors using the inks I have on hand.  With iron-on vinyl, you are limited to the vinyl colors.  With screen printing, you can make any color!

For more tips on mixing Speedball fabric inks, I have several ink recipe guides available to take the guesswork out of mixing.  These guides work in proportions so you can mix a small amount for one or two shirts.  Or, you can mix larger batches for big projects.

patriotic t-shirt screen pritning diy project usa

Tips for Bleach Dying Shirt

  • The bleach will spread a little bit after you spray it on.  We ended up with larger white areas because we really covered the middle area of our shirts.  As it dried, it continued to spread out.
  • Wear old clothes and shoes.  The spray bottle technique kept the bleach pretty contained, but we did get a little bit on our gloves.  Anything you touch with the bleach will turn white!
  • You’ll notice in the video, I tried using a washcloth to drip larger splotches.  This worked pretty well, but the bleach ate through the Dollar Tree wash cloth pretty quickly!

Watch this Bleach Tie Dye Project In Action

11 Comments

  1. Omgosh Jennifer… you’ve once again amazed me!!!! I’m adding this to my ToDo List to try!!!❤️❤️❤️

    Reply
  2. Oh I love this idea!!

    Reply
  3. Such an awesome idea. Going to remix it for my husband for Father’s Day!! Thank you!!

    Reply
    • That will be a great gift! I hope it turned out great!

      Reply
  4. Do you have the svg? I love that one!

    Reply
  5. Have you had any issue with the bleach eating thru the tshirt as it did with the washcloth?

    Reply
    • I did have one shirt that didn’t work. It was a acid wash shirt so it was thin to begin with. I’d stick with 100% cotton or cotton/poly blends. Let it soak in for 20 minutes or so then wash it. Each shirt brand may work differently but so far most shirts I’ve tried worked great!

      Reply
  6. Are you using 100% cotton or a poly blend type shirt?

    Reply
    • I’ve used both and they both worked great. With really thin shirts, you just want to be careful not to leave the bleach on too long or it can eat through the shirt.

      Reply
  7. Do you wash with laundry detergent or just run in washer without?

    Reply

Leave a Reply to Anjelli.p Cancel reply

Your email address will not be published. Required fields are marked *

Want to get the latest screen printing tips and tricks delivered to your inbox?

Join my email list and be the first to know about new techniques and project ideas!